Precautions For Installing Window Sealing Strips

1. Before installing the glass, carefully remove the debris in the notch, such as mortar, brick chips, wood blocks, etc., carefully align the glass when placing it, ensure that the gap on both sides is even, and correct and fix it in time to prevent collision, displacement, and deviation Center of notch.

2. The installation position of the top is generally on the window (door) fan, the surrounding of the frame fan or the sealing bridge (wind block) to enhance the seal between the frame and the fan.

3. When sealing the glass with sealant, you should squeeze the glass with a rubber strip or a rubber block to leave a gap for the glue. The depth of the glue should not be less than 5mm. Before the glue is cured, the glass should be kept from vibration.

4. The rubber sealing strip can not be pulled too tightly, and the blanking length is 2O-3Omm longer than the assembly length. When installing the window sealing strip, it should be inlaid in place, the surface should be straight, and it should be in close contact with the glass and the glass notch, so that the force around the glass is even. At the corners, the rubber strips should be cut off at an inclined plane, and glue should be injected at the break to be firmly bonded.

5. Top specification is an important factor affecting the performance of sliding doors and windows and watertightness, and also an important factor affecting the opening and closing force of doors and windows. Oversized tops or high vertical hairs not only make assembly difficult, but also increase the resistance of doors and windows, especially the initial resistance when opening and the final resistance when closing.

6. If the specification is too small, or the height of the vertical top is not enough, it is easy to come out of the groove, which greatly reduces the sealing performance of the doors and windows. The tops need to be siliconized. The tops of qualified quality have a straight surface, the bottom plate and vertical hairs are smooth, without bending, and there is no pitting on the bottom plate, which meets the 0.2mm requirement.

Installing window sealing strips is an indispensable process when installing doors and windows. Everyone knows some knowledge about installing window sealing strips, which can make our home more wind and rainproof.

HAINING LEADER SEAL CO.,LTD
Add:376# Tangnan East Road Xiashi Street,haining,jiaxing,zhejiang
Tel:+86-573-87020818
Fax:+86-573-87097588
Ph:+8615167323161
E-mail:leader@leadersealing.com