How To Install Plastic Steel Window Sealing Strip

1. Glass gasket and sealing tape: (window frame, sash) After welding and cleaning the corner, the rubber strip should be pushed in the correct direction with a special roller to push the rubber strip into the notch of the profile, and at the same time Press the head down until it fits into the notch of the profile. Because the rubber strip is an elastomer, it may shrink after being rolled. The correct method is: when the rubber strip is installed at the two ends of the interface, the two ends of the rubber strip are retracted a little bit in the middle, leaving 2- 3 cm shrinkage margin, then cut into the notch.

2. Glass bead: manually insert the tip of the bead into the groove of the profile according to the correct surface, and then press the exposed surface of the bead firmly to press the bead into the gap between the glass and the profile. The tape at both ends retracts a little towards the middle, leaving a length of 1-2 cm, cut it off, and press it into the notch.

HAINING LEADER SEAL CO.,LTD
Add:376# Tangnan East Road Xiashi Street,haining,jiaxing,zhejiang
Tel:+86-573-87020818
Fax:+86-573-87097588
Ph:+8615167323161
E-mail:leader@leadersealing.com