Door And Window Sealing Strip Manufacturers Tell Everyone How To Properly Maintain Door And Window Sealing Strips

From the analysis of the mid-range door and window market, the cost of sealing strips only accounts for 0.1-0.5% of doors and windows. For the entire construction project, its cost is negligible, but the role of sealing strips cannot be underestimated. Here is a brief introduction to the correct maintenance of the door and window sealing strips, I hope it will help you.

The first is to check the sealing strip for large cracks and breaks. If the sealing strip is broken or has a large crack, it can be repaired with adhesive. Especially with special adhesive for sealing strips, large cracks can be easily repaired. Of course, if the sealing strip is severely damaged or aging, it is best to replace the new sealing strip to save trouble. It is not difficult to replace the sealing strip, but if you want to do better, it is best to ask a professional to do it.

The daily maintenance work of the sealing strip mainly includes the following items. The first is to use car detergent to clean, after cleaning, apply a layer of high permeability protective agent to prevent the seal from aging. In addition, the gaps between the sealing strips are easily filled with sand and dust, which can cause rust. For this reason, sand and dust should be removed with a brush.

Sealing strip is an important part of doors and windows. It is a powerful measure to ensure airtightness, watertightness and sound insulation of doors and windows. At the same time, it is a reliable guarantee for the safe existence of glass in doors and windows after being subjected to external forces. As the sealing strip is affected by climate and sunlight, it will shrink, age, and deform. Therefore, the sealing strip is not allowed to work in a stretched state and should be kept in a free state.

In order to clamp the glass tightly, the sealing strip is often pulled too tightly during the installation process to ensure a free state and make it in a stretched and deformed state. Practice has proved that since the sealing strip is installed in a state of tensile deformation, the sealing strip has fallen off, broken, and cracked. For this reason, during installation, the length of the sealing strip should be longer than that of the assembly side of the door and window. The inclined surface is broken at the corner, and the adhesive is used to stick it firmly, leaving enough margin for expansion and contraction.

Zhejiang Lijialong Brush Co., Ltd. has high quality and brand guarantee! Users are welcome to negotiate and cooperate!