Home > News > Content
How Do I Use The Window Seal
Jun 19, 2017

The glass mat and stop the rubber strip-window frame, the sash should be in the welding clear angle after the rubber strip according to the correct face direction with the special roller wheel will be a little force to the profile Groove mouth, at the same time, the plastic strip head downward pressure to the embedded profile groove. 


Glass layering-will be the plastic strip in accordance with the correct surface by hand to the tip of the bar into the profile groove, and then press the exposed surface of the rubber strip, the glue bar into the glass and the gap between the profile. 

foam weather strip 5.jpg

The end of the two ends of the plastic strip to the middle of a point, leaving 1-2 centimeters after the length of the cut, press into the groove mouth.


Previous: Windows Sealing Strip Installation Considerations

Next: No Information