Product Categories
Contact Information
Home > News > Content
Door And Window Specifications
Feb 10, 2018

Door and window specifications:

     Sliding doors and windows top of the installation site is generally in the window (door) fan, frame fan around the four or seal bridge (file wind block), to enhance the seal between the box and fan. Door and window top specifications affect the watertight doors and windows and watertight performance is one of the most important factor, but also affect the opening and closing force of the window is an important factor.

    If the specifications of the window and roof tops appear too large or vertical hair is too high, then it will bring great difficulty to the assembly, and make the door and window movement resistance increases, especially the initial resistance when opening and closing the last position Resistance larger. If the specification is too small or vertical top height is not enough, easy to escape from the tank, so that the sealing performance of doors and windows greatly reduced. So, windows and doors tops are subject to silicidation, the appearance of qualified seal appearance for the surface flat, floor and vertical hair smooth, no bending, no pockmarks on the floor, in line with the provisions of 0.20MM.

    If the specifications of the window and roof tops appear too large or vertical hair is too high, then it will bring great difficulty to the assembly, and make the door and window movement resistance increases, especially the initial resistance when opening and closing the last position Resistance larger. If the specification is too small or vertical top height is not enough, easy to escape from the tank, so that the sealing performance of doors and windows greatly reduced. So, windows and doors tops are subject to silicidation, the appearance of qualified seal appearance for the surface flat, floor and vertical hair smooth, no bending, no pockmarks on the floor, in line with the provisions of 0.20MM.

    For sliding windows, sliding doors, the selection of hydrophobic top quality wool. Its quality in line with JG / T 635-1996 "building doors and windows sealed top technical conditions" standards.

Top of the installation area is generally in the window (door) fan, the frame around the four or seal bridge (file wind block), enhance the seal between the box and fan. 

    I hope for your help!


HAINING LEADER SEAL CO.,LTD
Add:376# Tangnan East Road Xiashi Street,haining,jiaxing,zhejiang
Tel:+86-573-87020818
Fax:+86-573-87097588
Ph:+8615167323161
E-mail:
leader@leadersealing.com