Entry Door Weather Stripping
Entry door weather stripping
Common seal on the market, there are door seals, tops, plastic strips three.
The door leaf seal is mainly used for the seal between the door and the door frame. The top is mainly used for the seal between the door frame and the door leaf, while the strip is mainly used for the seal between the glass and the door leaf.
The sliding window, the general use of plastic seal, the pressure on the doors and windows and have a special sealant groove, through the pressure strip and the inner seal strip, so that the glass and the box more closely to ensure the tight doors and windows . On the sliding sash seal installation, there are several ways in general.
1, the rubber seal can not be pulled too tight during installation, should be inlaid in place, so that the surface is straight, in close contact with the glass, glass notch, the periphery of the glass to maintain uniform force. Then in the corner of the rubber strip cut off from the bevel, in the broken place into the glue to make it firmly bonded.
2, the use of sealant sealant fixed glass, the first use of rubber will squeeze the glass, leaving gaps for plastic injection can be. Pay attention to the depth of injection of glue is not less than 5mm, and to ensure that the glue is not hardened before the glue is cured.
HAINING LEADER SEAL CO.,LTD
Add:376# Tangnan East Road Xiashi Street,haining,jiaxing,zhejiang